Sensor Series
delphi-connectors
8.12
U
U
NOTE: Specifi cations in this catalog are for general reference only and are subject to change without notice. To verify product information, please contact a Delphi representative.
Description
Transmission temperature sensors are continuous
function devices that change resistance inversely
proportional to temperature. The two primary types
of sensors that monitor the automatic transmission
. uid are: the metal stator temperature sensor and the
plastic sump temperature sensor. The stator sensor
consists of a brass or stainless steel shell, thermal
grease, insulating sleeve, gask et, and insert-molded
connector containing an NTC thermistor. The sump
sensor consists of a high temperature plastic shell and
a patented pre-mold sub-assembly that contains an
NTC thermistor with a crimpless conductive path.
Typical Application
These sensors measure the . uid temperature in two
transmission environments: in-line near the stator and
the sump tank. A signal is provided to the Powertrain
Control Module (PCM).
Female Metri-Pack
Connector
Female Terminal
TPA (Terminal
Position Assurance)
Sensor Assembly
Transmission
Transmission Temperature Sensors
Transmission Color Material
Temp. Sensors
Housing Connector
12160855
Black Brass PA66 HS IM
12129691
Md. Gray PA66 HS IM ĘC
150 Metri-Pack Female Connector
Unsealed
Cavities Part # Color Material TPA
2
12047662 Black PA66 HS IM
15324070
150 Metri-Pack Female Terminals
Unsealed
Part # Cable Range
(mm
2
)
Material Plating
12047767 1.0-0.80
Silicon Bronze Tin
12064971 0.50-0.35
Silicon Bronze Tin